Clay Lady Downunder

Polymer clay shape cutters | (Pebble Shape - Freddo) | clay cutters | Gilly cutters | Clay Tools | Clay Supplies

$16.00

Clay Lady Downunder

Polymer clay shape cutters | (Pebble Shape - Freddo) | clay cutters | Gilly cutters | Clay Tools | Clay Supplies

$16.00

Gilly cutters (Pebble Shape - Freddo) Polymer clay and precious metal clay shape cutters

This is a Set of 5 cutters.

Suitable for all brands for polymer clay, ceramic clay, precious metal clay, fondant and more.

Each cutter has a tapered .04mm sharp cutting edge. Tapered edges are much better than vertical cutting edges as they allow the clay to be pushed out as you cut through the clay. We have been printing cutters here in Australia since 2018 so you can be sure they are of the highest quality. In fact we were the first along with one other maker in Australia to design and print clay shape cutters in Australia.

Cutters are printed to order on 3D printers using PLA filament. PLA is a biodegradable and biocompatible plastic that comes from renewable resources.

They can be used over and over again. Just wash with soapy cold water or damp cloth. Not suitable for dishwasher as the heat will warp the shapes. Not suitable for oven as they will melt. Keep out of the sun.

PLEASE take a close look at the picture to make sure you understand shapes and sizes to avoid disappointment.

# SIZES #

Largest Size: 7cm | 70mm Long x 4.25cm | 42mm wide
Smallest Size: 3.5cm | 35mm Long x 2cm | 20mm wide

# NOTE #

- The colour of cutters you receive may different from the colour in photos.
- Any questions, just message me. I try my best and usually reply within 12 - 24 hours.
- We do custom orders so feel free to write to us and request a custom shape. Also, if you don’t want all shapes in the pack, feel free to ask for a certain size.
- If when you receive your order there are any problems, please contact me asap so that we can rectify. We are only human so errors sometimes occur.

THANKS SO VERY MUCH FOR SUPPORTING OUR VERY SMALL HOME BUSINESS BASED IN BRISBANE, QLD, AUSTRALIA.

  • Description

Gilly cutters (Pebble Shape - Freddo) Polymer clay and precious metal clay shape cutters

This is a Set of 5 cutters.

Suitable for all brands for polymer clay, ceramic clay, precious metal clay, fondant and more.

Each cutter has a tapered .04mm sharp cutting edge. Tapered edges are much better than vertical cutting edges as they allow the clay to be pushed out as you cut through the clay. We have been printing cutters here in Australia since 2018 so you can be sure they are of the highest quality. In fact we were the first along with one other maker in Australia to design and print clay shape cutters in Australia.

Cutters are printed to order on 3D printers using PLA filament. PLA is a biodegradable and biocompatible plastic that comes from renewable resources.

They can be used over and over again. Just wash with soapy cold water or damp cloth. Not suitable for dishwasher as the heat will warp the shapes. Not suitable for oven as they will melt. Keep out of the sun.

PLEASE take a close look at the picture to make sure you understand shapes and sizes to avoid disappointment.

# SIZES #

Largest Size: 7cm | 70mm Long x 4.25cm | 42mm wide
Smallest Size: 3.5cm | 35mm Long x 2cm | 20mm wide

# NOTE #

- The colour of cutters you receive may different from the colour in photos.
- Any questions, just message me. I try my best and usually reply within 12 - 24 hours.
- We do custom orders so feel free to write to us and request a custom shape. Also, if you don’t want all shapes in the pack, feel free to ask for a certain size.
- If when you receive your order there are any problems, please contact me asap so that we can rectify. We are only human so errors sometimes occur.

THANKS SO VERY MUCH FOR SUPPORTING OUR VERY SMALL HOME BUSINESS BASED IN BRISBANE, QLD, AUSTRALIA.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)